ALBLIS-350 is a versatile ‘Flat Plate’ intermittent motion automatic blister packing machine that can produce Alu-Alu blister packs by cold forming method as well as PVC-Alu blister packs by thermoforming method. This is a ‘Flat-Forming-Flat-Sealing’ type machine that is utilized for packing of smaller and regular shaped solid articles such as pharmaceutical tablets, capsules, dragees etc., in Alu-Alu or PVC-Alu blister packs. This machine can also be used for packing of Ampoules, Vials, Tubes as well as cream. paste, jam etc in PVC-Alu blister packs. The blister forming, sealing, batch code embossing, pack perforation, indexing and punching operations are of intermittent reciprocating motion. Various types and styles of product feeding devices are offered to suit different application.
The output capacity of the machine depends on the product characteristics and thus on the type of feeding device. Normally for cold forming operation to produce Alu-Alu blisters this machine would operate at 25-35 cycles per minute and for thermoforming operation to produce PVC-Alu blisters it would operate at 30-50 cycles per minute.
| Specifications | |
|---|---|
| Base Material - Max Width (Cold Form Laminated ALU Foil/ PVC/PVC-PVDC) 0.2 to 0.3 Thick; In Reel Form Max. Ø250. | 350 mm |
| Lidding Material - Max. Width (HSL Coated Hard ALU / Glassine Foil) 0.02 to 0.04 Thick; In Reel Form Max. Ø220. | 350 mm |
| Max. Forming Area | 340 mm x 160 mm |
| Max. Forming depth | 14 mm |
| Max. Output (Packs/Min) | Up to 400 packs per minute depending on pack size and pack configuration |
| Dimensions | 4400mm x 1200mm x 2100mm (H) |
| Max. Strokes/Min | 35 (Alu - Alu), 50 (Alu - PVC) |
